Improper belt tension can cause the belt to squeal, regardless of the belt’s age. Check/adjust the belt tension on the new belt and keep the old belt as a backup in case the new one breaks sometime (since the new one is already installed I wouldn’t take it off now…)
-
Archives
- January 2012
- December 2011
- November 2011
- October 2011
- September 2011
- August 2011
- July 2011
- June 2011
- May 2011
- April 2011
- March 2011
- February 2011
- January 2011
- December 2010
- November 2010
- October 2010
- July 2010
- June 2010
- May 2010
- April 2010
- March 2010
- February 2010
- January 2010
- December 2009
- November 2009
- October 2009
- September 2009
-
Meta
Improper belt tension can cause the belt to squeal, regardless of the belt’s age. Check/adjust the belt tension on the new belt and keep the old belt as a backup in case the new one breaks sometime (since the new one is already installed I wouldn’t take it off now…)
References :
Belt could be too tight or too loose. If it is not an issue of too tight or loose go to the auto parts store and get a can of belt dressing and spray it down a little.
References :
Go to your local auto parts store they have a spray the goes on your belt that willstop it from squeaking. It is as simple as buying and spraying.
It DOES work!!!
References :
Been there, done that!
Do not use spray. It squeals again a few weeks later and dries in the grooves of the pulleys. Vaseline. A thin coating does not slip and helps the belt last longer. If it still squeaks check your accessories; power steering, alternator, AC
References :
International service bulletin